Dinstar FXS Bedienungsanleitung PDF herunterladen (Seite 19)

DAG Series User Manual

Dinstar Technologies Co., Ltd.

1. Local Network

Figure 3-3-5 Local Network

Table 3-3-2 Description Local Network

Work Mode

This parameter controls whether the device is working in NAT

router mode or Bridge mode.

WAN Port Parameter

This option specifies the WAN port’s Ip address, and its Ethernet

network work mode.

Link speed & duplex This option specifies the Ethernet

network’s work mode. It have: Auto Detect,10Mbps/Half

Duplex,10Mpbs/Full Duplex,100Mbps/Half Duplex,

100Mpbs/Full Duplex, There are three modes to operate the

DAG serial WAN IP address, default option is Dynamically

assigned via DHCP.

Dynamically assigned via DHCP: All the field values for the

Static IP mode are not used. The equipment acquires its IP

address from the first DHCP server it discovers from the LAN it

is connected.

Static IP mode: Configure the IP address, Subnet Mask, Default

Router IP address, DNS Server 1 (primary), DNS Server 2

(secondary) fields. These fields are set to zero by default.

Dynamically assigned via PPPoE : Set the PPPoE account

settings. The equipment will establish a PPPoE session if any of

the PPPoE fields is set.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 40 41

Keine Kommentare

Dinstar FXS Bedienungsanleitung Seite 19